Geo DOT Blake 8inch Dovetail

Discussion in 'Forum: Saw Identification and Discussion' started by tonyba, Feb 23, 2021.

  1. tonyba

    tonyba Active Member

    Messages:
    37
    A Geo.Blake Back saw ; quite a petite thing of 18 tpi and with a 17thou plate.
    Iron back is 13mm wide so not a heavy saw.
    BSSM has George Blake Netherthorpe Sheffield Geo.BlakeA.jpg Geo.BlakeB.jpg Geo.BlakeC.jpg
    1816-1820.
     
    Menno and shoarthing like this.
  2. Charlie Earnest

    Charlie Earnest Member

    Messages:
    14
    Here is my 8” GEO • BLAKE E2E37716-8222-4DC0-9334-9CA542BD17D6.jpeg 1B9824DE-A5F1-4E40-A6FA-5D168098DD26.jpeg DC630E75-66D2-4116-AF3D-09AF90B80542.jpeg
     
    gmac and shoarthing like this.
  3. Joe S

    Joe S Most Valued Member

    Messages:
    376
    Hey Charlie.
    A wonderful thing with such an unusual stamping. Have to love the tooth line but I am sure with the options you have it will never be forced to cut wood again. A deserved retirement after some 200 years.
    Enjoy
    Joe S.
     
  4. David

    David Most Valued Member

    Messages:
    315
    Geo Blake full.jpeg Geo Blake handle.jpeg Geo Blake stamp 2.jpeg And here is my example, an 18" brass back.
     
    tonyba, gmac and shoarthing like this.