PDA

View Full Version : Saw Makers Forum

  1. Making a Bow Saw Handle
  2. A simple filing guide for setting PPI on a new saw
  3. A Rosling
  4. Slitting a brass saw back
  5. Progressive Rake Filing Guide
  6. Question: W. Tyzack Sons & Turner Sheffield
  7. Question: Saw Sets?
  8. Still manufacturing Saws in Sheffield
  9. Question: Easiest way to cut spring steel?
  10. MARSDEN HANDSAWS: SHEFFIELD
  11. J&I Taylor
  12. Refitting hardbacks.
  13. Matilda Bow Saw.
  14. Two Lawyers Tools
  15. Saw doctors tools
  16. Cutting saw teeth with a fly press
  17. Making a new hand saw.
  18. Taper ground saws.
  19. Making a new rip saw.
  20. Some Saw Doctor's Tools
  21. Suggestions for making saw backs: folded, slotted or laminated?
  22. Information required please
  23. Re-toothing a modern re-sharpenable saw.
  24. Pair of Dovetails Saws (second try)
  25. Pair of open handled backsaws
  26. The saw vise thread
  27. Taper grinding the saw plate ?
  28. Cutting up some bronze backs...
  29. Foley retoother model 31/32
  30. Slotted vs. Folded backs
  31. later Disston No 7 handle
  32. New member
  33. Signature backsaw handle.
  34. Large Joiner's Saw
  35. Foley continues to torment me...
  36. Saw plates steel and backs supplies
  37. Installing folded backs...troubleshooting?
  38. Split-Nuts
  39. A couple backs for Joe...
  40. Backs for Stewies Disston #70 clone
  41. Another dovetail saw completed.
  42. New tool for machining parts...Rivett 1020F
  43. Saw Hammers
  44. Saw and scythe grinding.
  45. Bubinga Dovetail Saw.
  46. Hello, and a few saws I am working on
  47. Chamfering brass flat stock
  48. Need some saw screws
  49. Saw Handle Templates
  50. Medallion Toolworks
  51. Waterjet cutting